JCB bale spike and grab attachments ensure efficient handling

Among the comprehensive range of JCB AGRI attachments supplied ready to put to work on JCB telehandlers and loaders for the hay- and silage-making season are bale spikes in single- and multiple-tine configurations,  a roller-type silage-bale handler, and a ‘clap hands’ grab for wrapped and unwrapped bales.

The products are certified for use with JCB machines and in addition to being strong and durable are easily installed and operated on the diverse range of JCB loading and materials handling machines.

For efficient handling of square and round bales of hay, silage and straw, JCB produces single- and twin-spike attachments with shorter supplementary tines that help secure the load safely.

The single-bale design suits machines such as the JCB TM180 and TM220 telescopic compact loaders as well as the TM310 full-size machine, and the 526-56 and 527-58 compact and larger telehandlers when fitted with Compact Tool Carrier, standard Tool Carrier, Q-Fit and Pin & Cone attachment interfaces.

The compact machines equipped with either of the Tool Carrier units can also handle the larger version that carries two spiked round bales side-by-side or a single rectangular bale up to 1.2m (4ft) square and 2.5m (8ft) long.

Other bale handling options include the convertible bale spike with bolt-on tines that enable the attachment to be used in single- or twin-spike configuration.

Either can be chosen to suit the capacity of the loader being used; and the removable tines are also easily replaced when worn or taken off for added safety when travelling on the road.

A high-back frame version with 40mm forged square tines provides added stability for placing bales on to a stack or retrieving them subsequently, especially when the high lift capability of a telehandler is being exploited.

When delicate handling of silage bales is called for, the JCB AGRI ‘clap hands’ grab and roller tine attachments provide the solution, especially when the bales are wrapped.

The former has a double-acting hydraulic cylinder to close tubular frame ‘paddles’ against a big rectangular bale or a round bale – whether sitting on-end or with the curved side to the ground – while the heavy-duty 12mm tubes of the roller design gently cradles and lifts from beneath the curved side of a round bale.

With carefully considered geometry and a lack of any sharp edges on either implement, operators can be sure of lifting bales off a wrapper and loading them on to a trailer or storage stack with minimum risk of the protective wrap being torn or punctured.

Sell your stuff

Whether you’re a dealer or private seller, let Farm Machinery put your item in front of thousands of potential buyers.

Find Out More

Need Help?

How to get the most out of Farm Machinery listings. Check out our FAQs page.

Find Out More

Subscribe

Subscribe to Farm Machinery magazine to see all the latest listings by receiving the magazine in the post before they go online.

Find Out More

© 2002-2018 Evegate Publishing Ltd.

Terms & Conditions Web design Kent